Device With A Single Network Interface - HIKVISION DS-9616NI-I8 User Manual


Check Enable DHCP to obtain IP settings automatically if a DHCP server is available on the
network.

Valid MTU value range is 500 to 9676.
Step 4 Click Apply.

15.1.2 Device with a Single Network Interface

Step 1 Go to System > Network > TCP/IP.
Step 2 Configure network parameters as needed.

Check Enable DHCP to obtain IP settings automatically if a DHCP server is available on the
network.

Valid MTU value range is 500 to 9676.
Step 3 Click Apply.
Network Video Recorder User Manual
Figure 15-2 TCP/IP Settings
158