Netb Uilder Ii 8-Slot Extended Bridge /Router; Installing The Extended Chassis; Unpacking Your Chassis - 3Com NETBuilder II Installing Instruction

Installing bridge/router for ezbuilt systems and base chassis
Hide thumbs Also See for NETBuilder II:
Table of Contents

Advertisement

3
EZBuilt System
Installing the
Extended Chassis

Unpacking Your Chassis

NETB
UILDER
B
/R
RIDGE
OUTER
The NETBuilder II bridge/router is a powerful, modular system designed to
handle a large variety of LAN and WAN networks. I/O modules plug easily into
the chassis and provide expandability and compatibility for your WANs
and LANs.
The Extended chassis holds up to eight regular- or extended-format modules
The NETBuilder II Extended bridge/router is available as an EZBuilt system with
the main processor and software preinstalled, or separately as a base chassis.
Your system consists of a chassis, the main processor (either the Dual Processor
Engine (DPE) module or the Communications Engine Card (CEC) 20 module),
and the software preloaded on an installed PC flash memory card.
The NETBuilder II chassis with a CEC 20 module has the flash memory card
installed in the internal flash memory drive. The chassis also has a floppy disk
drive.
The NETBuilder II chassis with a DPE module has the flash memory card
installed in flash memory drive A on the DPE module. The DPE module does
not support a floppy disk drive.
The following sections describe how to install your NETBuilder II Extended
chassis.
After you have removed your chassis from the carton, verify that you have
received all of the following items:
Chassis — The EZBuilt system has the main processor module and software
already installed.
Accessory box containing the following items:
Documentation binder and guides
Power cord
Rack-mount brackets and hardware
Cable strain-relief brackets
Software package (EZBuilt system only)
If you do not have all of these items, contact your network supplier.
If any of the items are damaged, contact the shipping company to file a report.
If you need to return the chassis to your network supplier, ship it in the original
carton and antistatic shielded bag. If the original carton was damaged in
shipment, repack the system in a carton that provides equivalent protection.
II 8-S
LOT
E
XTENDED

Advertisement

Table of Contents
loading

Table of Contents