Table of Contents
Advertisement
Assembly and Operation Manual
8.9 Assembly and disassembly of the speed gate components
Attention!
Speed gate components are made of polished stainless steel and glass. Be careful during
the assembly, to prevent the components from falling and damage, place them on an even
and steady surface, prevent them from scratches.
8.9.1 Central post cover plate
To remove the central post cover plate (5), pull the cover plate down along the post, take it aside
from the post, bringing the hooks from slots in the central post (Fig. 19).
Central post cover plate is to be installed in the reverse order.
32
Figure 19. Central post cover plate disassembly
Advertisement
Table of Contents
