Download
Share
Print this page
  1. Manuals
  2. Brands
  3. PERCo Manuals
  4. Fencing & Gates
  5. ST-01
  6. Manual

PERCo ST-01 Manual

Speed gate
Hide thumbs Also See for ST-01:

Advertisement

Quick Links

Download this manual
ST-01 Speed gate
Application
perco.com
linkedin.com/mwlite/company/perco
ST-01 Speed gate with swing panels is designed for indoor operation. It is an ideal solution for
sites with high aesthetic and comfort requirements.
Speed gate top covers can be made of tempered glass or stainless steel. The swing panels
of ST-01 can be of different width: 650 mm, 900 mm, and 1000 mm. 900 mm and 1000
mm swing panels are designed for people in wheelchairs, and can be used as an additional
emergency exit. The swing panels are moving away when a passage takes place.
ST-01 Speed gate with stainless steel top covers
If an increased number of passage lanes is needed, STD-01
double-sided sections can be installed. Each double-sided
section allows arranging one extra passage lane. Various
versions of ST-01 are available to install optional equipment:
a built-in card reader (the turnstile includes the FP- 01C front
panel), a built-in barcode scanner (with the FP-01Q front
panel), as well as a bracket for installing other optional
equipment (with the FP-01A front panel).
+50
+1
temperature
operating
range
voltage
2
passage
motor drive
direction
Bracket for mounting optional
equipment
export@perco.com
W
160 W
24V
power consumption
60
persons/min
+7 (812) 247-04-64

Advertisement

loading
Need help?

Need help?

Do you have a question about the ST-01 and is the answer not in the manual?

Questions and answers

Related Manuals for PERCo ST-01

Summary of Contents for PERCo ST-01

  • Page 1 Speed gate top covers can be made of tempered glass or stainless steel. The swing panels of ST-01 can be of different width: 650 mm, 900 mm, and 1000 mm. 900 mm and 1000 mm swing panels are designed for people in wheelchairs, and can be used as an additional emergency exit.
  • Page 2 ST-01 Speed gate ST-01 Speed gate with a post for embedding a barcode scanner ST-01 Speed gate with a built-in card capture reader Operating modes The tracking system is equipped with two levels of infrared sensors: 14 pairs are located on the upper level and 28 –...
  • Page 3 ST-01 Speed gate Main features • operation of the speed gate from RC-panel, WRC, ACS • built-in electronic boards • safe voltage – 24 V • power consumption – max. 160 W per passage • two levels of infrared sensors control the passage zone, 14 pairs are located on the upper level and 28 –...
  • Page 4 ST-01 Speed gate Size1 and Size2 switches positioning on the St-01.771 control board, depending on the type of swing panels: Switches position Swing panels type Size 1 Size 2 ATG-300 ATG-300Н ATG-425, ATG-475 ATG-575 Operating The product with regard to resistance to environmental exposure complies with GOST15150- conditions 69 category NF4 (operation in premises with climate control).
  • Page 5 Master section (side of the bidirectional section) of one passage lane. The master section (side of the bidirectional section) is equipped with the ST-01.771 control board (located at the bottom of the central section post behind the cover plate). All external connections are made to the board contacts.
  • Page 6 LEFT INDICATOR ORANGE STOP INDICATOR RIGHT INDICATOR BROWN BUZZER LEFT BUTTON STOP BUTTON RIGHT BUTTON SIREN ACS INPUTS SG PS RI PS RI A GREEN RI B GREEN * ST-01 Speed gate wiring diagram perco.com linkedin.com/mwlite/company/perco export@perco.com +7 (812) 247-04-64...
  • Page 7 RS#1 RS#2 RS#’N’ ‘N’ Connection of the ST-01 turnstile and STD-01 bidirectional sections to arrange a passage zone with several passage lanes Operation The speed gate can operate from an RC-panel (included in the delivery set), WRC and ACS algorithm controller.
  • Page 8 (selected by the R2 switch) with automatic opening and closing of the panels during passage. Training mode (R1 switch in the OFF position, and R2 switch on the ST-01.771 control board in the ON position) allows manually adjusting the home (closed) position of the turnstile swing panels.
  • Page 9 ST-01 Speed gate Overall dimensions ATG-450 swing panels ATG-425 swing panels ATG-575 swing panels ATG-475 swing panels ATG-425H swing panels forATG-300 -A=650, 8=920; L overall = 920n+1170m+1270k+130 (mm), for ATG-300H -A=650, 8=920; n - number of ATG-300 (ATG-300H), forATG-425 -A=900, 8=1170;...
  • Page 10 Product. In case of sale and installation of the equipment by authorized PERCo dealers and service centers, the warranty starts from the date of commissioning. Should there be no date of sale on the warranty card, the warranty period shall commence from the date of manufacture specified in the Certificate and on the Product label.