Control Board - PERCo ST-01 Assembly And Operation Manual

Assembly and Operation Manual
Figure 8. Overall view and dimensions of the RC-panel
1, 2, 3 – LEFT, STOP, RIGHT buttons for mode setting;
4, 6 – green "Left", "Right" indicators; 5 – red "Stop" indicator

5.2.4 Control board

Speed gate control board (Fig. 9) is installed in the central post of Master section. Remove the
central post cover plate in order to access the board (see Sect. 8.9.1).
The control board features a microcontroller, which processes the incoming control commands,
transferred to Unlock A, Stop, Unlock B and Fire Alarm control inputs, monitors the status of swing
panels turn optical sensors and creates commands for the motor drive of the speed gate swing
panels on the basis of the data received.
The microcontroller also creates signals on the control board outputs: for indication on the RC-
panel (Led A, Led Stop and Led B outputs), for the external indication (Light A, Light B outputs),
about the passage registration in the corresponding direction (PASS A and PASS B), about the
alarm (Alarm). The control board features:
Figure 9. Control board overall view
14