Design And Operation; Main Features - PERCo ST-01 Assembly And Operation Manual

Figure 5. Speed gate overall dimensions with several passage lanes

5 DESIGN AND OPERATION

5.1 Main features


The speed gate allows to perform several authorized single passages in a row in one direction
without the swing panels being closed.

The speed gate is a normally-open device, which means that when the equipment is de-
energized the swing panels move freely at ±90º angle.

The intrusion detectors are installed on two levels throughout the speed gate passage lane.
This allows monitoring user's location inside the passage lane. The speed gate also makes it
possible for several users to be in the same passage lane at the same time.

There are several swing panel models, that can be chosen according to the passage lane
width and to the operation peculiarities upon making an order.

Section top covers may be chosen when ordering; they can be made of tempered glass or
stainless steel.

A wide range of optional equipment can be installed: card capture reader, barcode reader,
face recognition terminal etc.

The number of the passage lanes can be increased with STD-01 double-sided section
installation.

In case several passage lanes are arranged, the front-end indication blocks display the
passage direction.

The speed gate can operate in pulse and potential modes.

It is possible to switch the speed gate to "Auto-opening in the selected direction" mode –
entering the speed gate will force the swing panels to automatically open in the preset
direction and to close after the passage is finished.

The speed gate will generate an alarm signal in all operating modes if the passage lane is
occupied for more than 30 seconds.
ST-01 Speed gate, STD-01 Double-sided section
9