Operation; Overview; Safety First - Nordson ASYMTEK Spectrum Series Owner's Manual

4

Operation

4.1

Overview

Before operating the valve tilt feature, you must define the Dot and Line Parameters in Fluidmove, run a
Valve Offsets procedure, and create a program with tilt commands.

NOTE
Refer to the Fluidmove User Guide for detailed information on Fluidmove programming
and fluid setup.
This section covers the following topics:
• Dot and Line Parameters for Tilt
• Valve Offsets
• Creating a Program with Tilt
4.2

Safety First

Operation of your dispensing system involves heat, air pressure, electrical power, heat, mechanical
devices, and the use of hazardous materials. It is essential that every person servicing or operating the
dispensing system fully understands all hazards, risks, and safety precautions. Refer to the safety section
in the applicable dispensing system manual for important safety information.
Operation 11