Safety; Overview; Safety Warning Symbols; Equipment Use - Nordson ASYMTEK Spectrum Series Owner's Manual

2

Safety

2.1

Overview

Dispensing system operation involves heat, air pressure, fluid pressure, mechanical and pneumatic
devices, electrical power, and the use of hazardous materials. Refer to the safety section of your
particular dispensing system and valve manuals prior to installing and operating the Single-Axis Tilt
Mechanism.
Safety is considered a joint responsibility between the original equipment manufacturer (Nordson
ASYMTEK) and the end-user (owner). All safety precautions and practices should be in accordance with
local regulations and facility practice.
2.2

Safety Warning Symbols

The following warning symbols are located throughout the manual to warn of personal or property
damage.
Symbol
2.3

Equipment Use

2.3.1

Intended Use

Use of Nordson ASYMTEK equipment in ways other than those described in the documentation supplied
with the equipment may result in injury to persons or damage to property.
2.3.2

Misuse

Some examples of unintended use of equipment include:

Using incompatible materials

Making unauthorized modifications

Removing or bypassing safety guards or interlocks

Using incompatible or damaged parts

Using unapproved auxiliary equipment

Operating equipment in excess of maximum ratings
WARNING!
Unsafe equipment conditions can result in personal injury or property damage.
Failure to adhere to safety warnings and precautions can result in serious bodily
harm to the user.
Safety

Table 2-1 Safety Warning Symbols

Personnel Safety Warning. This symbol appears in a
shaded text block to warn you about actions that could cause
personal injury or death.
Property Damage Caution. This symbol appears in a shaded
text block to warn you about actions that could cause serious
damage to the machinery, software, parts being processed,
and facilities.
Description
5