Table of Contents
Advertisement
Configuring the PG 760
5
5-18
In suspend mode, the CPU is stopped and can only be restarted by an
interrupt, for example, keyboard, mouse, COM 1/2, hard disk.
Standby CPU
Speed
[Low]
[Medium]
[High]
[Max]
Fixed Disk
[1min][2min]
Timeout
[3min][4min]
[5min][10min]
[16min]
CRT
[OFF in Standby] This means that the sync signals to the VGA
[ON]
CPU speed in standby mode:
1/16 CPU clock
1/8 CPU clock
1/4 CPU clock
1/1 CPU clock
Minutes after which the hard disk drive is
switched off if it is not accessed. If the hard
disk is accessed after it has been switched off,
there is a delay during which the hard disk is
run up again.
interface are switched off in standby mode
thus also causing the monitor itself to enter
standby mode.
Monitor always remains in operation.
PG 760 Programming Device
C79000-G7076-C761-01
Advertisement
Table of Contents
