Sinec H1 - Siemens SIMATIC PG 760 Manual

Installing and Operating the PG 760
3.7
Networking
PG 760s via

SINEC H1

(ETHERNET)
3
Principle of
Operation
Hardware
Requirements
3-16
SINEC H1
SINEC H1 is an industry-standard bus-type local area network (LAN) based
on ETHERNET (ISO 8802/3), and has the following characteristic features:
high speed (10 Mbps), simple expansion capability, open communications
and widespread applications.
SINEC H1 is the generic term for networks and network components
operating on the CSMA/CD (ETHERNET) principle. SINEC H1 is a
bus-type that uses a triaxial cable (H1) as its transmission medium.
You need the following module for networking with SINEC H1:
CP 1413
Note
You will find more detailed information on the SINEC modules in the
SINEC Catalog IK 10 (Order No. E86060-K6710-A101-Ax).
For information on how to install the modules and make any modifications
to the network configuration, please refer to the installation instructions for
the various modules.
For the dual port RAM of the CP 1413 module, the address area D000-DFFF
Hex on PG 760 has been reserved (see also Table 7-4).
PG 760 Programming Device
C79000-G7076-C761-01