2.5
Transport
Carrying the
Despite the robust design of the PG 760, its internal components are sensitive
PG 760
to severe vibrations or jolts. When moving the PG 760, you must therefore
make sure that it is protected from severe mechanical forces.
Use the original packing material if you have to ship the PG 760 from one
location to another.
Caution
!
Risk of damage!
When transporting the unit cold weather, when it may be submitted to
extreme variations in temprature, make sure that there is no moisture
(condensation) on or in the unit.
The unit must be allowed to reach room temperature slowly before you switch
it on. If condensation has formed, you should wait approximately 12 hours
before switching on the unit.
PG 760 Programming Device
C79000-G7076-C761-01
Unpacking and Setting Up the PG 760
2
2-13