Table of Contents
Advertisement
3.6
SINEC L2
Networking
SINEC L2 is an open and robustly designed bus-type local area network
PG 740s via
(LAN) for industrial applications. It can be used to configure networks with
SINEC L2
up to 127 stations. SINEC L2 has a data transfer rate of 1.5 million bps.
(PROFIBUS)
Principle of
SINEC L2 operates on the master-slave principle with token passing
Operation
(corresponds to DIN 19245, PROFIBUS). It distinguishes between active and
passive stations. An active station receives the token and passes it on to the
next station within a specified time.
Hardware
You need the following components, for instance, for networking with
Requirements
SINEC L2:
Note
You will find more detailed information on the SINEC modules in the
SINEC Catalog IK 10 (Order No. E86060-K6710-A101-Ax).
For information on how to install the modules and make any modifications
to the network configuration, please refer to the installation instructions for
the various modules.
PG 760 Programming Device
C79000-G7076-C761-01
CP 5412
RS 485 bus terminal
RS 485 interface
Shielded twisted two-wire cable (LAN cable)
Installing and Operating the PG 760
3
3-15
Advertisement
Table of Contents
