Table of Contents
Advertisement
Option "Hardware
The following submenu appears when you select the option "Hardware
Options"
Options" in the main menu:
Figure 5-8 "PG 760 Hardware Options" Submenu
The parameters of the interfaces present on the basic module are set here.
Configure MPI
Address Range
Programming
Interface
Internal COM1
Internal COM2
Internal LPT1
LPT Mode
CRT 640 x 480
CRT 800 x 600
CRT 1024 x 768
Trackball / PS/2
Mouse
PG 760 Programming Device
C79000-G7076-C761-01
PhoenixBIOS Setup-Copyright 1985-95 Phoenix Technologies Ltd.
Advanced
Security
Main
PG 760 Hardware Options
[Adr. – CC00H]
Configure MPI Adr.-Range:
Programming interface:
[Enabled]
[3F8, IRQ 4]
Internal COM1:
Internal COM2:
[2F8, IRQ 3]
Internal LPT1:
[378, IRQ 7]
LPT Mode:
[Output Only]
Screen-resolution:
CRT 640 x 480:
[75 Hz]
CRT 800 x 600:
[75 Hz]
CRT 1024 x 768:
[75 Hz]
Trackball / PS/2 Mouse:
[external]
F1
Help
Select Item
+ / –
ESC
Exit
Select Menu
Enter Select
Entry
Address range in which the multipoint interface is selected.
"0CC00H" or "0DC00H" are memory addresses. The MPI
occupies an address area of 2 KB. "Disabled" enables the address
area and disables the interface.
Enables or disables the interface for S7 memory cards. This
interface occupies the I/O address range 300h - 31fh.
Enables or disables the COM1/TTY interface
Enables or disables the COM2 interface
Enables or disables the printer port
The mode can be selected here if the LPT1 interface is enabled.
Output Only
Bi-directional
for EPP support
Image refresh rate with resolution of 640 x 480 pixels
Image refresh rate with resolution of 800 x 600 pixels
Image refresh rate with resolution of 1024 x 768 pixels
Internal
External
Disabled
Configuring the PG 760
Power
Exit
Item Specific Help
Configures the address range
or disables MPI. To prevent
address conflicts, choose bet-
ween two different base ad-
dresses.
Change Values
F9
Setup Defaults
Sub-Menu
F10
Previous Values
Function
Standard mode
Printer port can also be used as an input port or
The PS/2 interface is active.
The IRQ 12 is occupied.
The PS/2 interface is active. The IRQ 12 is
occupied. The keyboard trackball is disabled.
The PS/2 interface is inactive,
IRQ12 is available.
5
5-13
Advertisement
Table of Contents
