Copying Onto Envelopes From The Multi Bypass Tray (Tray 7) - Ricoh Pro C901s Operating Instructions Manual

Copying onto Envelopes from the Multi Bypass Tray (Tray 7)

When copying onto envelopes, specify the paper type and paper size.
• Before using this function, specify the paper type and weight under Paper Type in Tray Paper Settings.
1. Place envelopes print side up on the multi bypass tray (tray 7).
2. While pinching the release lever, adjust the side fences to the size of the paper.
3. Set the end fence.
4. Press the elevator switch on the multi bypass tray (tray 7).
5. Select the multi bypass tray (tray 7) on the control panel.
6. Press the [ ] key.
7. Press [Program Custom Size].
8. Specify the envelope size, and then press [OK] twice.
9. Place the originals, and then press the [Start] key.
• When placing an original on the exposure glass, place the original with the bottom line aligned to
the left scale.
• When placing an original in the ADF, place the original with the bottom line inserted in the ADF.
Copying from the Multi Bypass Tray (Tray 7)
2
67