3.
Set the end fence.
1. End fence
To remove the end fence, pinch it to release the stopper and slide it to the right.
4.
Press the elevator switch on the multi bypass tray (tray 7).
The green lamp of the elevator switch is blinking while the original table is going up and down, and
keeps lit when it stops.
Press the elevator switch to move down the original table if you want to either add paper or remove
jammed ones.
1. Elevator switch
1
BZH013
BZH010
1
1
BZH011
Copying from the Multi Bypass Tray (Tray 7)
2
59