Copying From The Multi Bypass Tray (Tray A); Copying Onto Regular Size Paper From The Multi Bypass Tray (Tray A) - Ricoh Pro C7100s Operating Instructions Manual

Copying from the Multi Bypass Tray (Tray A)

Use the multi bypass tray (Tray A) to copy onto transparencies, translucent paper, and paper that
cannot be loaded in the paper trays.
For details about the optional units required for this function, see "Functions Requiring Optional
Configurations", Getting Started.
About how to load paper in the multi bypass tray (Tray A), see Paper Specifications and Adding Paper
for details.
If the paper type you want to copy onto is not shown on the [Special Paper] screen, you must specify the
paper type under [Tray Paper Settings]. For details about [Tray Paper Settings], see "Tray Paper
Settings", Paper Settings.
1. Load the paper face up in the multi bypass tray (Tray A).
2. Press [Tray A].
3. Make sure that [Paper Size] is selected.
4. Specify the size of the paper, and then press [OK].
5. Press [Special Paper].
6. Specify the type of the paper as necessary, and then press [OK].
7. Place the originals, and then press the [Start] key.
8. When the copy job is finished, press the [Reset] key to clear the settings.

Copying onto Regular Size Paper from the Multi Bypass Tray (Tray A)

1. Load the paper face up in the multi bypass tray (Tray A).
2. Press [Tray A].
3. Make sure that [Paper Size] is selected.
4. Press [Select Regular Size].
5. Select the paper size.
6. Press [OK] twice.
7. Place the originals, and then press the [Start] key.
• For details about paper sizes that can be loaded in the multi bypass tray (Tray A), see
"Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
Copying from the Multi Bypass Tray (Tray A)
29