Ricoh Pro C901s Operating Instructions Manual page 111

The length/size of a cover sheet depends on the thickness of the book block's spine. For details about how
to calculate approximate spine thickness and cover sheet length/size, see "Loading Cover Sheets into the
Interposer of the Perfect Binder", Troubleshooting.
1. Place the originals for the book block in the ADF.
2. Load cover sheets into the perfect binder interposer.
For details, see "Loading cover sheets", Troubleshooting.
3. Select the paper tray for the book block sheets.
4. Press [Output/ Customize Function/ Finisher].
5. Press [Perfect Binding].
6. Select one of the binding positions.
You can also specify the binding position and cut position.
7. Specify a binding position and a cut size if necessary.
8. After making all settings, press [OK].
9. Press the [Start] key.
Glue heating begins.
When the glue is hot enough, binding starts.
Finishing
2
109