Ricoh Pro C901s Operating Instructions Manual page 62

2. Basic Copying
5. Select the multi bypass tray (tray 7) on the control panel.
6. Press the [ ] key.
7. Select the size and type of the paper.
8. Press [OK].
9. Place the originals, and then press the [Start] key.
2
• To use the multi bypass tray (tray 7), the Wide LCT is required.
• Load only as much paper as can be held between the guides on the multi bypass tray (tray 7).
Overloading the multi bypass tray (tray 7) can result in misfeeds and skewed images.
• To support A4 , 8
1. Extender
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
• When the Sort function is selected, press the [ ] key after all originals have been scanned.
• When the Panel Key Sound is turned off, it will not sound if you insert paper into the multi bypass tray
(tray 7). For details about Panel Key Sound, see "System Settings", General Settings Guide.
• Printing on special paper such as thick paper may be slower than printing on plain paper.
• If you place originals on the exposure glass and want the copies to be delivered face down, select
Face Down for Copy Eject Face Method in Glass Mode. For details about Copy Eject Face Method
in Glass Mode, see "Copier/Document Server Features", General Settings Guide.
• When copying multiple originals using the multi bypass tray (tray 7), pages are delivered in reverse
order because the factory default setting is face up.
• If you select Tab Stock, you cannot have copies delivered face up.
• If you use paper larger than 458 mm, 18.1 inches in size, you cannot have copies delivered face
down.
• Depending on the environment where the machine is being used, you might at times hear a rustling
noise from paper moving through the machine. This noise does not indicate a malfunction.
60
1
/ × 11 or larger paper sizes, pull out the extender.
2
1
BZH012