• For details about paper sizes, weights, and the number of sheets that can be cut by the trimmer, see
"Specifications for Trimmer", About This Machine.
Punch
You can make punch holes in copies.
• You cannot specify Punch with Z-fold.
2 holes
3 holes
Original orientation and punch hole position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing
the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the punch hole positions
is as follows:
BZH086
BZH206
Finishing
2
99