Ricoh Pro C901s Operating Instructions Manual page 94

2. Basic Copying
• If you press [Suspend] after checking the results, return to step 1 to adjust the copy settings as
necessary. You can change the settings. However, depending on the combination of functions, you
may not be able to change some settings.
2
Changing the number of sets
You can change the number of copy sets during copying.
• This function can only be used when the Sort function is selected.
1. While "Copying..." is displayed, press the [Stop] key.
2. Press [Change Quantity].
3. Enter the number of copy sets with the number keys, and then press the [ ] key.
4. Press [Continue].
Copying starts again.
• The number of sets you can enter in step 3 differs depending on when the [Stop] key is pressed.
When memory is full
If the amount of data of the scanned originals exceeds the capacity of memory, scanning is interrupted.
1. Press the [Start] key.
All scanned pages are copied, and data stored in memory are cleared.
2. Remove the copies, and then continue copying following the instructions on the display.
• The number of pages that can be stored in memory is about 2000 pages of A4 (8
originals. It depends on the type of originals or memory settings.
92
1
/ × 11) size
2