Ricoh Pro C901s Operating Instructions Manual page 261

• The maximum original image size that can be rotated is as follows: Metric version: A4, Inch
1
version: 8 / × 11
2
• When using Slant, Left 2, or Top 2 with the Combine, Double Copies or Auto Reduce / Enlarge
function, "Blank part will appear. Check orientation." message may appear depending on the
orientation of originals and paper you placed. In this case, change the paper orientation.
• When Top or Bottom is selected and the paper with the same orientation as the original is not
loaded, the image is rotated and the paper with the same size and the different orientation is
selected.
• When Left 2, or Top 2 is selected, the following settings are useful to rotate images appropriately:
• Auto Reduce / Enlarge or Auto Paper Select
• Replace Auto Tray Switching with With Image Rotation in User Tools.
• If you select Center for the Booklet or Magazine function, the machine staples the paper, and
folds it like a book, then delivers the paper folded.
Punch
• When using Punch and Combine, Double Copies, or Auto Reduce / Enlarge, the message "Blank
part will appear. Check orientation." may appear because of the orientation of the original and
the copy paper. If this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary slightly.
Z-fold
• You cannot use the following paper with this function:
• Special paper
• Letterhead
• Thick paper
• Thin paper
• Tab stock
• Label paper (adhesive labels)
• Cardstock
• Envelope
• Even if you place different size originals in the ADF, appropriate size of copy paper can be
automatically selected and Z-folded using the Mixed Sizes mode and Auto Paper Select function.
Load the paper you want to use in the paper trays beforehand. Paper sizes that can be Z-folded
when using the Mixed Sizes mode are as follows (the larger size paper is Z-folded):
A3 and A4
B4 JIS and B5 JIS
11 × 17 and 8
1
/ × 11
2
Supplementary Information
259
6