Ricoh Pro C901s Operating Instructions Manual page 262

6. Appendix
• The paper sizes that can be stapled after being Z-folded are A3 , B4 JIS , and 11 × 17 .
• The number of Z-folded copies that can be stapled is as follows (paper weight: 80 g/m
lb. Bond):
10 Z-folded sheets, 9 Z-folded sheets and 0 to 10 unfolded sheets, 8 Z-folded sheets and 0 to
20 unfolded sheets, 7 Z-folded sheets and 0 to 30 unfolded sheets, 6 Z-folded sheets and 0 to
40 unfolded sheets, 5 Z-folded sheets and 0 to 50 unfolded sheets, 4 Z-folded sheets and 0 to
60 unfolded sheets, 3 Z-folded sheets and 0 to 70 unfolded sheets, 2 Z-folded sheets and 0 to
80 unfolded sheets, 1 Z-folded sheets and 0 to 90 unfolded sheets
• When using this function with 1 Sided
the originals of each size are in even numbers. If you have an odd number of originals, insert
blank sheets to adjust the total.
6
• Depending on the Z-fold settings, you may not be able to use Rotate Copy.
• Even if you have selected Face Up for Copy Eject Face Method in Glass Mode in User Tools,
the copies will be delivered face down.
• You cannot specify Punch with Z-fold.
• The printed side of the paper may occasionally be scratched or stained with toner depending
on the paper and the conditions of the machine's environment.
Size Magnification
• If the calculated ratio is over the maximum or under the minimum ratio, it is automatically adjusted
to within available range. However, with some ratios, parts of the image might not be copied
or margins will appear on copies.
• The machine selects reproduction ratios of between 25 400%.
Directional Size Magnification
• The reproduction ratios you can specify are 25 400%.
260
insert blank sheet
BZH166
2 Sided and Mixed Sizes modes, always ensure that
BZH167
2
, 20