Sterilizer Features - VWR AccuSterilizer 1130 Series Operation Manual

D
ESCRIPTION
14
Stop (Red)
This control is used to terminate any cycle. It is
also used for scrolling through other functions.

Sterilizer Features

Printer
This feature (available on some models) is a
thermal printer that record's each cycle's
performance. See page 40 for more information.
Pressure Monitor
The pressure monitor indicates the pressure inside
the chamber. This monitor's readings can be found
on the display as each cycle is running.
Door Security
While the chamber is under pressure, the door is
held securely closed with three separate locking
systems. First, there is a locking handle that you
must tighten to hold the door fully closed. The
locking handle turns clockwise to close and
counterclockwise to open. Second, there is a
pressure actuated locking pin which automatically
secures the door, preventing it from being
inadvertently opened while there is pressure in the
chamber. Finally, there is a backup catch which will
prevent the door from opening fully even if there is
a small amount of pressure in the chamber. You
release this catch with a lever which is located in
the lower left side of the door. To fully open the
door, pull the door release lever toward you.