Environmental Conditions; Declaration Of Conformity - VWR AccuSterilizer 1130 Series Operation Manual

S
PECIFICATIONS
10

Environmental Conditions

Operating: 4°C - 40°C; 20% - 80% relative
humidity, non-condensing. Installation
Category II (overvoltage) in
accordance with IEC 664. Pollution
Degree 2 in accordance with IEC 664.
Altitude limit: 3,650 meters.
Storage: -25°C - 65°C; 20% - 80% relative
humidity.

Declaration of Conformity

Barnstead|Thermolyne hereby declares under its sole
responsibility that this product conforms with the
technical requirements of the following standards:
EMC: EN50081-1 Generic Emission
Standard; EN 50082-1 Generic
Immunity Standard.
Safety: IEC 1010-1-92 Safety requirements
for electrical equipment for
measurement, control and laboratory
use; Part I: General Requirements
IEC 1010-2-010 Part II: Particular
requirements for laboratory equipment
for the heating of materials
per the provisions of the Electromagnetic
Compatibility Directive 89/336/EEC, as amended by
92/31/EEC and 93/68/EEC, and per the provisions of
the Low Voltage Directive 73/23/EEC, as amended by
93/68/EEC.
The authorized representative located within the
European Community is:
Electrothermal Engineering, Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available
upon request.