Maintenance & Servicing; Environmental Conditions; Intended Use; Equipment Disposal - VWR 444-7084 Instruction Manual

M & S
AINTENANCE ERVICING
The Incubating Orbital Shaker is built for long, trouble-free, dependable
service.No lubrication or other technical user maintenance is required.
However at least every three (3) months you should:
• Unplug the unit.
• Remove any accumulated dirt from the base and tray.
• Check all accessible items to make sure they are properly tightened.
The unit should be given the care normally required for any electrical
appliance. Avoid wetting or unnecessary exposure to fumes. Spills
should be removed promptly. DO NOT use a cleaning agent or solvent
on the front panel or lid which is abrasive or harmful to plastics, nor
one which is flammable. Always ensure the power is disconnected
from the unit prior to any cleaning. If the unit ever requires service,
contact your VWR representative.
E C
NVIRONMENTAL ONDITIONS
Operating Conditions: Indoor use only.
Temperature: 15 to 32°C (59 to 90°F)
Humidity: maximum 80% relative humidity, non-condensing
Altitude: 0 to 6,562 ft (2000 M) above sea level
Non-Operating Storage:
Temperature: -20 to 65°C (-4 to 149°F)
Humidity: maximum 80% relative humidity, non-condensing
Installation Category II and Pollution Degree 2 in accordance with
IEC 664.
I U
NTENDED SE
The Incubating Orbital Shaker is designed for a variety of shaking
applications.
E D
QUIPMENT ISPOSAL
This equipment must not be disposed of with unsorted
waste. It is your responsibility to correctly dispose of the
equipment at life-cycle-end by handing it over to an
authorized facility for separate collection and recycling.
It is also your responsibility to decontaminate the
equipment in case of biological, chemical and/or
radiological contamination, so as to protect the persons involved in
the disposal and recycling of the equipment from health hazards.
For more information about where you can drop off your waste of
equipment, please contact your local dealer from whom you originally
purchased this equipment. By doing so, you will help to conserve
natural and environmental resources and you will ensure that your
equipment is recycled in a manner that protects human health.
2