Table of Contents
Advertisement
3.9.9 Editing a Script
1. Select the Editor: Script tab.
2. Select the script from the Scripts list.
3. Click the Edit button. The Button Configuration window appears.
4. Edit the script name in the Cue Name text region.
5. Select the Button Number and State from the appropriate lists.
6. Click OK.
3.9.10 Aborting a Script in Progress
The user can abort any in progress script by manually resetting the system. This is accomplished by either
holding down Buttons #1 and #5 together for 5 seconds on the Christie ACT controller or pressing the Save
button in the Editor: Script window. The CUE / READY / ERROR lights will flash ON when the reset has
been triggered.
Upon completing the reset, Christie ACT will execute the OnUserReset event and any associated actions. Refer
to
Section 3.9.5 Adding a Cue to a Script or
3.9.11 Deleting a Property
Use the Delete button to delete properties, buttons or information by selecting the item and clicking the Delete
button. The item will disappear from the list but is not permanently deleted until you click the Save button. If
you attempt to move to another window without saving your changes, you will be prompted to save.
If you choose not to save your changes and you want to revert to your last saved configuration, click the
Revert button.
3.9.12 Managing a Library
The Editor: Library tab contains a Manage Library button where you can append a library, export an entire
library or export a selected device type.
3.9.13 Checking Scripts
The Editor: Script tab contains a Check Scripts button where you can validate the scripts you have created.
Simply click the Check Scripts button to determine if any errors exit.
Christie ACT User Manual
020-100129-05 Rev. 1 (02-2010)
Library.
Figure 3-30 Manage Library Options
Section 3: Operation
3-31
Advertisement
Table of Contents
