Editor: Operator Buttons Tab; Relay Test Tab - Christie ACT User Manual

Editor: Operator Buttons Tab

The Editor: Operator Buttons tab allows you to create virtual buttons. Each button is associated with a
subroutine, which essentially allows Christie ACT to support more cues then it can physically. Once a button is
created, it is displayed to the Operator tab. Refer to
Select to create
a button.
1. Click Add Button. The Operator Button window opens.
2. Type the name of the new button.
3. Click the subroutine button and select a Subroutine from the list.

3.6.3 Relay Test Tab

The Relay Test tab () allows you to toggle the relay states.
Click Open to open the
Relay.
Christie ACT User Manual
020-100129-05 Rev. 1 (02-2010)
Figure 3-14 Editor: Operator Buttons Virtual Buttons
Figure 3-15 Relay Test Tab
Section 3.4.2 Operator Tab.
Section 3: Operation
Click Close to close
the Relay.
Current status.
3-13