Back Panel; Back Display Panel; I/O Connections And Communications; Input/Output Connector Types - Christie ACT User Manual

Table of Contents

2.3

Back Panel

Communications

• Ethernet Management - Connect with an Ethernet switch for transmission of control and status com-

munications.

• RS232 - Connect with a server, PC or other device for serial communication.

• RS422 - Connect an RS422-compatible controller for unusually long-distance serial communication.

• GPIO -This is a digital GPIO. Connect the desired GPIO-compatible device here for integration of

Christie ACT with an established control system. Devices connected via GPIO can operate in tandem with

Christie ACT, or vice versa and is often used for automation of regularly scheduled events. Refer to

6.7 GPIO

for input and output voltages.

AC Connector and Power Cord

you are using a line cord, socket and power plug that meets the appropriate local rating

standards. 2) Use only an AC power cord recommended by Christie. Do not attempt

operation if the AC supply and cord are not within the specified voltage and power range.

Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of

fire, shock or personal injury.

Use the Christie ACT power cord for any installation. Plug into an appropriate wall outlet or use the

convenience outlet in the CP2000 pedestal. Christie ACT is rated for 100-240VAC. Refer to

Section 6 Specifications

2.4

active script!

Christie ACT User Manual

020-100129-05 Rev. 1 (02-2010)

Figure 2-2 Christie ACT Back Panel

1) The North American rated line cord is provided with each unit. Ensure that

for more information.

Do not interrupt the Christie ACT while it is saving. This will interrupt any

Primary voltages MUST be connected by Qualified Electricians only!

Section 2: Installation & Setup

Section

2-3

Table of Contents