Table of Contents
Advertisement
Section 3: Operation
3.7
Configuring Christie ACT
The Config tab consists of five sub tabs (General, Network, Users, Communication, File Management) that
enable advanced operators, administrators, and users to define system operating parameters, change Ethernet
settings, and configure communication settings.
Config: General Tab
The Config: General tab provides access to various system parameters that must be defined according to your
requirements.
Select language for Web UI
menu.
Select the level of data
logging from the drop-
down menu.
Table 3.5 Summary of Config: General Tab
CONFIG: GENERAL TAB OPTIONS
Language
From the displayed list, select the desired language. Default is English.
Data Logging
Select the level of data logging from the displayed tab. Options are Minimal, Normal, Debug. Default is
Normal.
Date
Select the date from the displayed calendar.
Enter the hours, minutes and seconds. NOTE: If the 24 Hour Time option is check marked, the Select a
Time
Time window will not display the AM/PM selection option. In 24 Hour Time, click to add a checkmark to
display time in a 24 hour format or AM/PM format (default). This can be toggled without requiring re-con-
figuration.
Time Zone
Select your time zone from the list of world time zones.
3-14
Figure 3-16 Config: General Tab
Enable calendar from which a
date can be chosen.
Select to save adjustment.
Select to open clock settings
and set the time.
Enable to display time in a
24-hour format, disable for
12-hour standard format.
Select a time zone.
Christie ACT User Manual
020-100129-05 Rev. 1 (02-2010)
Advertisement
Table of Contents
