Editor: Script Tab - Christie ACT User Manual

Editor: Script Tab

The Editor: Script tab provides the core functionality to the system. It is where you manage and
configure the scripts that control Christie ACT. A set of pre-configured device cues are available. For
more information on adding scripts, refer to
Highlight the script in the
Scripts region to enable the
Edit, Delete, Up, and Down
buttons.
Table 3.3 Summary Editor: Script Tab Options
EDITOR: SCRIPT TAB OPTIONS
Add Subroutine
Add Cue
Add Action
Revert
Check Scripts
Subroutines
A subroutine is a collection of actions. For more information, refer to
Subroutine to a Script or Library
Cues
A cue is an input event which allows Christie ACT to perform associated actions. For example,
pressing button 1 will result in an event taking place. By adding a cue, you are configuring Christie
ACT to respond to an input event. For more information, refer to
Script or Library.
Actions
An action is an output event executed as a response to a cue. For example, sending a GPO pulse or
ethernet command to another device. For more information, refer to
a Script or Library.
Christie ACT User Manual
020-100129-05 Rev. 1 (02-2010)
Figure 3-12 Editor: Script Tab
Adds a new subroutine.
Adds a cue to the current script. Cues include assigning actions to the non-virtual buttons on
Christie ACT, setting the start and end time of a cue, etc. Refer to
9
.
Section Actions, on page 3-9
Adds a new action. Refer to
Reverts a previous event.
Checks the scripts to determine if the references are valid.
Section 3.9 Using Christie
Section 3.9.5 Adding a Cue to a
Section 3: Operation
ACT.
Section Cues, on page 3-
for a list of actions.
Section 3.9.2 Adding a
Section 3.9.3 Adding an Action to
3-11