Table of Contents
Advertisement
Section 3: Operation
Config: Users Tab
The Config: Users tab provides options for the management of users, passwords and user access
rights. Depending on your login level, you can manage users having the same or fewer access rights
than yourself.
To configure settings for users that will have access to Christie
options and instructions.
Capitalization is used for the username or password, Christie ACT will automatically convert it to
lower case. 2) Usernames can be a minimum of 4 and maximum of 32 characters. Passwords can be a
minimum of 4 and maximum of 128 Characters.
Table 3.7 Configuring Users
Task
Add a user and password
Edit a password
Editing a user's permission
level
Enabling and Disabling the
Auto-Login
3-16
Figure 3-18 Config: Users Tab
NOTES: 1) Do not use capitalization for usernames or passwords. If
Procedure
1. Click the Add button to open the Add User window.
2. Type the user name and password.
3. Click OK.
1. Select a user from the Users list.
2. Click the Password button to open the Edit Password window.
3. Type the new password.
4. Click OK
1. Select a user from the Users list.
2. Click the Permission Level button to the right of the text region to open the
Permission Level window.
3. Select the permission level from the list.
4. Click OK.
1. Click Auto-Login to add a checkmark (enabled).
2. The Operator Login Verification window appears.
3. Type the Username and Password of the operator.
, refer to
ACT
Table 3.7
Christie ACT User Manual
020-100129-05 Rev. 1 (02-2010)
for
Advertisement
Table of Contents
