Table of Contents
Advertisement
3.1 When to Configure the LSI8751SP
Chapter 3
Configuring the LSI8751SP
This chapter describes configuring the LSI8751SP and includes these
topics:
•
Section 3.1, "When to Configure the LSI8751SP," page 3-1
•
Section 3.2, "Starting the SCSI BIOS Configuration Utility," page 3-2
•
Section 3.3, "Exiting the SCSI BIOS Configuration Utility," page 3-14
In most cases you should not need to change the default configuration
of the host adapter. You may decide to alter these default values if there
is a conflict between device settings, or if you need to optimize system
performance.
Table 3.1
and
Table 3.2
The global settings affect the host adapter and all SCSI devices that are
connected to it. The device settings affect only individual SCSI devices.
Table 3.1
Global Default Settings
Settings for the Host
Adapter and All Devices
SCAM Support
Parity Checking
Host Adapter SCSI ID
Scan Order
1. Applies to BIOS version 4.09 and later.
LSI8751SP PCI to Ultra SCSI Host Adapter
list the configuration settings you can change.
Default Settings
1
Off
Enabled
7
Low to High (0-Max)
3-1
Advertisement
Table of Contents
