Adapter Setup Menu - LSI LSI8751SP User Manual

3.2.2.1 Adapter Setup Menu

3-8
You are returned to this menu after making changes to the configuration
of any host adapter or connected SCSI device. Before you exit this menu,
you are prompted to save or cancel any changes.
When you select Adapter Setup, the corresponding menu appears.
Figure 3.6 is an example of the Adapter Setup menu:
Figure 3.6 Adapter Setup Menu
Adapter Setup
SCAM Support
Parity
Host SCSI ID
Scan Order
Removable Media Support None
CHS Mapping
Spinup Delay (sec)
Help
Restore Default Setup
Exit this menu
The settings in this menu are global settings that affect the selected host
adapter and all SCSI devices attached to it. One of these choices can
be selected by highlighting it and pressing Enter.
SCAM Support – The LSI Logic BIOS Version 4.xx and above supports
the SCSI Plug and Play protocol called SCAM. SCAM support by default
is off in versions 4.09 and later for the LSI53C875 device. The user may
choose to turn this on only if the system drivers do not require SCAM off.
Note that if this BIOS is flashed onto a board with existing settings, then
these settings are not changed to reflect the new BIOS defaults. Go into
the Configuration Utility to change these settings.
Configuring the LSI8751SP
Off
Enabled
7
Low to High <0..Max>
SCSI Plug & Play Mapping
2