2.2.5 Making External SCSI Bus Connections
2-16
This section provides step-by-step instructions about making external
SCSI bus connections.
Step 1. If you need to connect external SCSI devices to the LSI8751SP,
plug the 68-pin connector on one end of a shielded external
SCSI cable (see
(see
Figure
This connector is now bracketed to the back panel of your
computer.
Figure 2.11 External Cable to Host Adapter
Installing the LSI8751SP
Figure
2.3) into the host adapter connector J3
2.1).
Figure 2.11
shows how this connection is made.