Table of Contents
Advertisement
Figure 2.1
Hardware Connections for the LSI8751SP
68-pin External
High Density
SCSI Interface
J3
WARNING: Never use more than two connectors simultaneously.
Step 6. Carefully insert edge connector J1 (see
adapter into the PCI slot. Make sure the edge connector is
properly aligned before pressing the board into place as shown
in
Figure
2.2.
You may notice that the components on the PCI host adapter
face the opposite way from non-PCI adapter boards you have
in your system. This is correct, and the board is keyed to go in
only one way.
Detailed Installation Procedure
68-pin Internal
High Density
SCSI Interface
J2
LED
Connector
J5
J1 to PCI
Bus Connector
on Mainboard
Figure
2.1) of the host
2-5
Advertisement
Table of Contents
