2.2.7 Internal SCSI Connections
2-20
If you have only internal SCSI device connections to your host adapter,
you must terminate the last internal device on the SCSI bus. You must
disable the terminators on all other devices. Termination on your host
adapter is automatically enabled in this case.
Figure 2.14
shows an example of how termination is determined for this
SCSI bus configuration.
Figure 2.14 Internal SCSI Device Termination
Last Device
on Chain –
Termination
Enabled
-
Installing the LSI8751SP
Does Not
End Chain –
Termination
Disabled
Host Adapter
Automatically
Terminated