Table of Contents
Advertisement
3.1 When to Configure the LSI21002
Chapter 3
Configuring the Host
Adapter
This chapter describes configuring the LSI21002 and includes these
topics:
•
Section 3.1, "When to Configure the LSI21002," page 3-1
•
Section 3.2, "Starting the SCSI BIOS Configuration Utility," page 3-2
•
Section 3.3, "Exiting the SCSI BIOS Configuration Utility," page 3-14
In most cases you should not need to change the default configuration
of your host adapter. You may decide to alter these default values if there
is a conflict between device settings, or if you need to optimize system
performance.
Table 3.1 and Table 3.2 list the configuration settings you can change.
The global settings effect your host adapter and all SCSI devices that are
connected to it. The device settings affect only individual SCSI devices.
Table 3.1
Global Default Settings
Settings for the Host Adapter and All Devices
SCAM Support
Parity Checking
Host Adapter SCSI ID
Scan Order
1. After 4.11.00 version of the BIOS.
LSI21002 PCI to Dual Channel SCSI Host Adapter
Default Settings
1
Off
Enabled
7
Low to High
(0-Max)
3-1
Advertisement
Table of Contents
