Internal Scsi Connections For Both Internal Connectors; Internal And Internal Scsi Device Termination - LSI LSI8751SP User Manual

2.2.10 Internal SCSI Connections for Both Internal Connectors

If you have made internal SCSI device connections to both internal
connectors (J2 and J4) on the host adapter, you must terminate the
internal devices on each end of the SCSI bus. You must disable the
termination on all other devices. Termination on your host adapter is
automatically disabled in this case. Remember, you must not use the
external connector J3 if you use both internal connectors.
Figure 2.17 shows an example of how termination is determined for this
SCSI bus configuration.
Figure 2.17 Internal and Internal SCSI Device Termination
Does Not
End Chain –
Termination
Disabled
Detailed Installation Procedure
Last Devices
on Chain –
Termination
Enabled
Host Adapter
Termination
Automatically
Disabled
2-23