2.2.3 Connecting the SCSI Peripherals
Internal SCSI bus connections to the LSI8751SP are made with an
unshielded, 68 or 50-conductor ribbon cable (see
of this cable is marked with a color to indicate the pin-1 side. Sometimes
the connectors on this cable are keyed to ensure proper pin-1
connection.
All external SCSI bus connections to the LSI8751SP are made with
shielded, 68-conductor cables (see
cable are always keyed to ensure proper pin-1 connection.
Figure 2.3
SCSI Cables
SCSI Cables for Internal Connections
and/or
SCSI Cable for External Connections
Detailed Installation Procedure
Figure
Figure
2.3). The connectors on this
68-pin
High Density
50-pin
Low Density
68-pin
High Density
2.3). One edge
2-7