Howdens TOWER UNIT 3 DRAWERS Assembly Instructions Manual page 7

:----------
Mark the position of the hanger bar. By measuring in 225mm to
the centre of the tower unit.
1
Fitting the second hanger bar. 1- Place hanger bar into first bracket and level up.
2- Make sure to mark position on the side wall 225mm from the back wall. 3- Then fix into position.
Page 2 of 2
225mm
Fix first bracket through both holes. (We recommend
16mm screws).
2
225mm
Back wall
3
Repeat 3-7 for remaining hanger bars.
UNB_TUDRAWER_INSTR_01.19