Howdens HYH1323 Manual

600mm Pull Down Shelving

Installation Overview

600mm
564mm
18mm
409mm

Assembly

Fit the shelf racks to the LH side panel aligning the rack
1
with the holes. Secure in 4 positions with screws.
Screw x4
(4x16mm)
Washer x4
HD417081
Installation into a 600mm cabinet required which has been secured to the wall
Cabinet door(s) must be able to open fully for the pull down mechanism to operate
This mechanism has moving parts and care must be taken when operating.
Care must be taken when pulling the shelving up and down. Hold the handle until fully extended or retracted.
*Lever adjustment required dependent upon weight. Set to heavy for installation (see operation information)
18mm
Shelf Racks x2
LH Side Panel x1
Do not use a power driver for this product installation
Ensure packaging is disposed of in a safe environmentally friendly way
442mm
614.5mm 684mm
19mm
270mm
270mm
290mm
412mm
2
Fit the handle bar slotting it into position.
HYH1323

Important Notes:

Storage load: Up to 9kgs*
Only use the handle to pull down.
720mm
Handle
Bar x1
Note: Make sure the
slot is located
HYH1323