Devices And Components; Test Device 0 986 613; Adapter Module 0 986 610 - Bosch Denoxtronic 2.1 Product Description

Test device adblue supply module
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
en
20 | Denoxtronic 2.1 | Devices and components
3.

Devices and components

i
This section provides an overview of the most
important devices and components that are required
for testing and repairing the AdBlue supply modules,
type Denoxtronic 2.1. Detailed instructions on
use and handling can be found in the separate
ESI[tronic] repair instructions Denoxtronic 2.1.
3.1
Test device 0 986 613 880
The test device 0 986 613 880 is intended to be used
together with all Denoxtronic toolsets as a workplace
for testing and repairing AdBlue supply modules.
The test device has all supply connections for the test
medium, test voltage, compressed air and calibration gas.
Fig. 1:
Test device 0 986 613 880
i
An example is shown in the figure (fig. 1).
Information on the scope of the delivery and setup
can be found in the original operating instructions
1 689 989 164.
|
1 689 989 404
2019-03-01
3.2

Adapter module 0 986 610 160

In tests of AdBlue delivery modules, the adapter
module 0 986 610 160 is used as an interface between
the test adapter 0 986 610 180, KTS 5XX / 6XX and the
dosing and delivery module.
The adapter module and the connecting cables are
used to supply both the test adapter and the delivery
module with voltage (24 V). A voltage stabilizer (30 V
DC / min. 20 A), e.g. Bosch 1 687 022 873, supplies the
adapter module with voltage.
The diagnostic data for the test is available from the
ESI[tronic] component diagnosis. A subscription to the
ESI[tronic] info type "K" is required.
The control unit in the delivery module is diagnosed
by its self-diagnosis system and the internal OBD fault
memory. The diagnosis includes reading/deleting the
OBD fault memory, an actuator test and function tests.
Fig. 2:
Adapter module 0 986 610 160
i
The proper way to connect and use the adapter
module is described in the ESI[tronic] test and
repair instructions.
i
A defective adapter module must be replaced in its
entirety.
Robert Bosch GmbH

Advertisement

Table of Contents
loading

Table of Contents