Hach NA5600 sc Na+ Installation Manual page 16

Connect a power cord—Analyzer with enclosure
The analyzer is available with or without an enclosure. If the analyzer does not have an enclosure, go
to Connect a power cord—Analyzer without enclosure on page 19.
Note: Do not use conduit to supply power.
5
Item supplied by user: Power cord
1. Remove the electrical access cover. Refer to Remove the electrical access cover on page 15.
2. Connect a power cord. Refer to the illustrated steps that follow.
3. Install the electrical access cover.
4. Do not connect the power cord to an electrical outlet.
5
Refer to Power cord guidelines on page 21.
16 English