Emu_Flash_Cs0_Usb.sup - Fujitsu MB91460 Series Application Note

3.1 EMU_FLASH_CS0_USB.sup

This debug configuration uses the external Flash memory connected to CS0 area of the
microcontroller.
After generating your software project use the PC Writer software to program the adequate
mhx-file (e.g. STANDALONE\ABS\91460_template_91461r.mhx) to the external Flash on
SK91461. Therefore connect the starterkit via serial cable (crossed cable!) to the PC's COM
port and set the onboard switches as following:
Table 5: Jumper and switches on SK91461 for Flash programming
Press the 'Full Operation' button and follow the instructions. Please refer to the programmer
description for more details.
© Fujitsu Microelectronics Europe GmbH
MB91461 Emulation
Chapter 3 Evaluation system with MB91461R
Name (Switches)
RES
P15_3
P15_2
INT0
MD0
MD1
MD2
MD3
Name (Jumpers)
P21_0
P21_1
P15_3
P15_2
Figure 9: PC Writer software
- 13 -
Setting
BRD
L
L
Don't care
L
L
L
L
Setting
Connection
Connection
Connection
Connection
MCU-AN-300029-E-V1