Dip Switches - Epson TM-300A Operator's Manual

3-4 DIP Switches

n
Locating DIP switches
On the bottom of your printer are DIP switches that allow the printer to be set or
perform a number of different functions.
The switches are numbered SW-l to SW-10, (TM-300A/B) or SW-l to SW-8
l
(TM-300PA/PB), from left to right as shown in figure below.
The lists on the following page describe each switch's function.
l
n n Setting the DIP switches
Follow these steps when changing DIP switch settings.
Turn the printer power switch off.
Flip the DIP switches using tweezers or other narrow-ended tool.
Switches are on when up and off when down.
The new setting takes effect when you turn on the printer.
NOTES:
Always change DIP-switch settings when printer is turned off.
l
Changes made with the power on have no effect until you turn the printer off
l
and then on again.
20