Esc J N - Epson TM-300A Operator's Manual

ESC D NUL clears all tabs. Any HT commands received after
l
clearing are ignored.
When a data value
[Notes]
l
value
this case, the following data is processed as normal data.
Up to 32 tab positions can be set. Data which exceeds 32 tab
l
positions is processed as normal data.
When data value <n>k exceeds the number of characters
l
printable on one line, the column position to be set = maximum
printable columns + 1.
Horizontal tab positions remain unchanged if the character
l
widths are changed after setting the horizontal tab positions.
[Default]
The default tab positions are at intervals of 8 characters (9th
column, 17th, 25th, ...) for the 7 X 9 font.
[Reference] HT

ESC J n

[Name] Print and feed paper using minimum units
[Format] <1B>H<4A>H<n>
0 n
[Range]
[Description] Prints one line of data from the print buffer and feeds the paper
n/144 inches
Sets the print starting position to the beginning of the line
l
• The predetermined line spacing remains unchanged.
Not defined.
[Default]
ESC R n
[Name] Select international character set
[Format] <1B>H<52>H<n>
0 n
[Range]
n
[Description] selects an international character set from the following table.
n
0
1
2
3
4
5
<n> k
is less than or equal to the preceding
<n>k-1,
the setting will be considered to be finished. In
255
10
Character Set
n
6
U.S.A.
France
7
8
Germany
U.K. 9
1 0
Denmark
Sweden
38
Character Set
Italy
Spain
Japan
Norway
Denmark II