Esc C 3 N - Epson TM-300A Operator's Manual

n = 0
[Default]
[Reference] See APPENDIX G Character Code Table
ESC U n
[Name] Set/cancel uni-directional printing
<1B>H<55>H<n>
[Format]
0 n
[Range]
[Description]
Sets or cancels uni-directional printing.
Only the lowest bit of
l
When
When
celed. (And bi-directional printing is set.)
[Notes] When uni-directional printing is set, the printer prints from left to
l
right.
When the user wants to avoid horizontal misalignment, this
l
command should be used to select uni-directional printing.
(Double-height printing, line printing, and so on.)
n = 0
[Default]

ESC c 3 n

[Name] Selects the paper-end detectors that will control the paper-end
signal
[Format] <1B>H<63>H<33>H<n>
0 n
[Range]
[Description] This command is supported only by the TM-300PA/PB.
Selects paper detectors to output signals on the paper-end status
line.
255
n
is valid.
n
= <* * * * * * * 1>B, uni-directional printing is set.
n
= < * * * * * * * 0>B, uni-directional printing is can-
255
3 9