Esc T N - Epson TM-300A Operator's Manual

ESC r n
[Name] Select print color
[Format] <1B>H<72>H<n>
n = O ,
[Range]
[Description] Selects the print color for every line.
When n = 0, black is selected.
l
When
l
[Note] Valid only when input at the beginning of a line.
n = 0
[Default]

ESC t n

[Name] Select character code table
<1B>H<74>H<n>
[Format]
0 n
[Range]
Selects page n from the character code table.
[Description]
n = 0
[Default]
[Reference] APPENDIX G Character Code Tables
ESC u n
[Name] Transmit peripheral device status
[Format] <1B>H<75>H<n>
n = 0
[Range]
This command is supported only by the TM-300A/B.
[Description]
Transmits the status of connector pin n.
The value of
l
n
0
1
n
= 1, red is selected.
l
n
is used as follows:
Connector pin
Drawer kick-out connector pin 3
4 3