[Notes]
It is possible to select multiple detectors for print control (to stop
l
printing.) In this case, if only one detector detects no paper, the
printer stops printing.
Printing is stopped after the current line is completed and the
•
paper is fed. (The printer goes OFF-LINE after printing stops.)
n = 0
[Default]
ESC c 5 n
[Name]
Enable/disable panel switch
[Format]
<1B>H<63>H<35>H<n>
0
n
[Range]
[Description]
Enables or disables the panel switch.
Only the lowest bit of
l
When
When
[Notes]
If the panel switch is disabled by this command, the panel
l
switch is unusable. Therefore, paper feeding using the FEED
switch cannot be executed (except when the printer cover is
open)
n = O
[Default]
ESCdn
[Name]
Print and feed paper
[Format]
<1B>H<64>H<n>
O
n
[Range]
[Description]
Prints one-line of data from the print buffer and performs
feeds.
Sets the print starting position to the beginning of the line.
l
The predetermined line spacing remains unchanged.
l
[Note]
Printing speed slows down because this command causes the
l
carriage to move before feeding paper.
[Default]
Not defined.
[Reference]
ESC 2, ESC 3
255
n
is valid.
n
= <* * * * * * *1>B, panel switch is disabled.
n
= < * * * * * * * 0>B, panel switch is enabled.
n
lines
255
4 1
n
line