Commands - Epson TM-300A Operator's Manual

6-3 Commands

HT
[Name] Horizontal tab
<09>H
[Format]
[Description] Moves the print position to the next horizontal tab position.
•
This command is ignored unless the next horizontal tab position
has been set.
[ N o t e s ] Horizontal tab positions are set by ESC D.
•
The default horizontal tab positions are at intervals of 8 char-
•
acters (9th column, 17th, 25th ...) for the 7 x 9 font
[Reference] ESC D
LF
[Name] Print and line feed
[Format] <OA>H
[Description]
Prints one-line of data from the print buffer and feeds one line
based on the current line spacing.
Sets the print starting position to the beginning of the line.
l
[Reference]
ESC 2, ESC 3
CR
[Name] Print and carriage return
[Format] <OD>H
[Description] Prints one-line of data from the print buffer and feeds no paper.
Sets the print starting position to the beginning of the line.
l
ESC SP n
[Name]
Set character right-side spacing
[Format] <l B>H<20>H<n>
[Range]
[Description] Sets the character right-side spacing.
3 2